LAMONA LAM1902 Uživatelský manuál stáhnout pdf (Strana 6)

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instructions supplied with the appliance.

• Keep the minimum distance from other appliances and units.

• Always take care when moving the appliance as it is heavy. Always use safety gloves

and enclosed footwear.

• Seal the cut surfaces with a sealant to prevent moisture to cause swelling.

• Protect the bottom of the appliance from steam and moisture.

• Do not install the appliance adjacent to a door or under a window. This prevents hot

cookware falling from the appliance when the door or the window is opened.

• Each appliance has cooling fans on the bottom.

• If the appliance is installed above a drawer:

– Do not store any small pieces or sheets of paper that could be pulled in, as they can

damage the cooling fans or impair the cooling system.

– Keep a distance of minimum 2 cm between the bottom of the appliance and parts

stored in the drawer.

Electrical Connection

WARNING! Risk of fire and electric shock.

• All electrical connections should be made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure that the appliance is disconnected from the

power supply.

• Make sure that the parameters on the rating plate are compatible with the electrical

ratings of the mains power supply.

• Make sure the appliance is installed correctly. Loose and incorrect electricity mains

cable or plug (if applicable) can make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or

hot cookware, when you connect the appliance to the near sockets.

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable.

Contact our Authorised Service Centre or an electrician to change a damaged mains

cable.

• The shock protection of live and insulated parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket only at the end of the installation. Make

sure that there is access to the mains plug after the installation.

• If the mains socket is loose, do not connect the mains plug.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips and contactors.

• The electrical installation must have an isolation device which lets you disconnect the

appliance from the mains at all poles. The isolation device must have a contact opening

width of minimum 3 mm.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Komentáře k této Příručce

Žádné komentáře

LAMONA LAM1902 Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Sporáky LAMONA LAM1902